triaxial analog accelerometer ? high accuracy acceleration measurement - the voltage output of the XL203A is directly proportional to the acceleration along the axes. each dc-coupled sensor output is fully scaled, referenced, and calibrated. ? rugged for harsh environments - the XL203A is robust and can be used in harsh environments. the machined 6061- t6 aluminum case has a black anodized fnish per mil-a-8625, plus the shielded cable has a high-temperature pvc jacket and tefon-insulated conductors. the unit has resilient power and will survive 5000 g powered and unpowered. ? small size - completely conditioned triaxial accelerometer in less than one cubic inch. ? built-in power supply regulation - unregulated dc power from +8.5 to +36 volts is all that is required to measure accelera - tion and temperature. rugged, small, 6 g or 15 g the XL203A is ready when you are. in stock and ready to ship, you can be taking measurements in less time than with built-to-order accelerometers. the small size and built-in power regulation allow the XL203A to ft where other accelerometers cant. choose bandwidth of 100 hz or 800 hz and range options of 6 g or 15 g to measure accelerations on three axes. the accelerometers have a nominal full scale output swing of 2 v olts. the zero g output level is nominally +2.5 volts. precise values are available on the included calibration certifcate. ? calibration certifcate - each XL203A is supplied with a calibration certifcate listing sensitivity and offset, as well as the on-axis and transverse alignment parameters needed to ensure rapid and effcient system implementation. the alignment data can be used to compensate the measured values if needed. ? self-test - a ttl-compatible self-test input causes a simulated acceleration to be injected into the accelerometer to verify chan - nel integrity and wiring connections. ? easy installation - integrated cable with 9-pin connector makes it easy to wire. four tapped holes simplify mounting, and optional mounting adapters are also available. ? earth friendly design - lead-free design makes the XL203A environmentally safe while api technologies assembly process ensures reliable functionality. fully potted electronics eliminates the possibility of tin whiskers-related failures. ? three-year warranty - api technologies accelerometers come with a three-year factory warranty. XL203A *technical data subject to change without notice preliminary
parameter min typical max units conditions/notes range - measurement full scale option r006 option r015 -6 -15 +6 +15 g g fsr = 12 g fsr = 30 g sensitivity at 25c, option r006 at 25c, option r015 drift t min to t max 333.3 133.3 .01 .03 mv/g mv/g %/c precise values on calibration certifcate precise values on calibration certifcate percent of sensitivity at 25c zero g bias level at 25c drift t min to t max 2.500 1.0 5.5 v mg/c precise values on calibration certifcate at 1.25c/min. temperature rate of change alignment deviation from ideal axes 1.0 3.0 degrees precise values on calibration certifcate can be compensated if required transverse sensitivity 2 % inherent sensor error, excluding misalignment nonlinearity 0.1 0.5 % fsr best ft straight line frequency response option b100 option b800 100 800 hz hz upper cutoff per option bnnn, -3 db pt 20% noise density 100 g/hz self test pull-up resistor 5 k logic 1 3.5 v, logic 0 1.5 v, 0 causes self test temperature sensor at 25c sensitivity 25 c bias level 2.5 2.5 mv/c v outputs output voltage swing output resistance (r out ) capacitive drive capability 0.2 100 1000 4.8 v pf i out = 2.5 ma (exclusive of r out ) power supply (v s ) input voltage limits input voltage - operating input current rejection ratio -20 +8.5 15 >120 +38 +36 20 v v ma db continuous dc temperature range (t a ) -40 +85 c mass 20 grams shock survival -5000 +5000 g any axis for 0.5 ms, powered or unpowered mechanical ordering information connections +1 855.294.3800 www.apitech.com +1 330.659.3312 2236 n. cleveland-massillon rd. akron, ohio 44333-1255 t a = t min to t max ; 8.5 v s 36 v; acceleration = 0 g, unless otherwise noted; within one year of calibration. specifcations for XL203A - improved specifcations available upon request custom mounting adapters available upon request. shown with 34170b mounting adapter (sold separately) pin 1 2 3 4 5 6 7 8 9 signal 1 sign 2 5 3 s n wire rn e range ell reen le ile re wie rev. 3/20/2013 0.354 9.00 0.354 9.00 0.787 20.00 0.580 14.73 0.240 6.10 3mm x 0.5mm thread 0.138 [3.50] deep (4) places bottom view 0.787 20.00 0.354 9.00 0.354 9.00 0.787 20.00 rear view 3 2 1 1 3 2 third angle XL203A - range r006 : 6 g r015 : 15 g r006 instrument XL203A - b100 - bandwidth b100 : 0 to 100 hz b800 : 0 to 800 hz t004 t ermination t 004 : 4 ft. cable with db9m
|
